Home About Products Technology Clientele Testimonials Contact Us
 
 
HYDROGEN LEAK PROBE
View Product
CHS-HY-001
View Product
MULTICHANNEL HYDROGEN DISPLAY MONITOR
View Product
HYDROGEN VIGIL BATTERY SAFE
View Product
HYDROGEN LEAK PROBE CONTROLLER
View Product
MULTICHANNEL HYDROGEN ALARM MONITOR
View Product
HYDROGEN VIGIL
View Product
THE INPUT DEVICES
View Product
THE CONTROLLERS
View Product
HYDROGEN VIGIL – 2W
View Product
HYDROGEN DIGITAL CONTROL SIGNAL TRANSMITTER
View Product
LEAK SENSE - NEW LAUNCH
View Product
HYDROGEN ANALOG CONTROL SIGNAL TRANSMITTER
View Product
 
 
> MULTICHANNEL HYDROGEN ALARM MONITOR
 

MULTICHANNEL HYDROGEN ALARM MONITOR: H2CON-6

 

STANDALONE ALARM AND MONITOR FOR REMOTE HYDROGEN AREA MONITORING

 

 

H2CON-6 is especially suited for H2 gas level detection, ventilation control and alarm applications.
  • It is a remote Hydrogen area monitoring device.
  • It is applied to Hydrogen storage and handling areas where there is danger of Hydrogen accumulation resulting in explosive atmosphere.  
  • Its micro-controller scans each of the six sensors with a fixed alarm threshold of 1%, 2% and >2.5% and gives control/alarm outputs of up to three relays.
  • It also has LED front panel indicators.
  • These outputs can then be used for ventilation fan control, hooter or overriding shut-down of charging etc. for the system to take early safety measures.  
  • Front panel LED bar graph indications for each channel is provided. Thus exact location of   fault can be identified.
  • An optional feature of H2CON-6 is that it can be connected over an isolated RS485 bus with MODBUS protocol.
SPECIFICATIONS OF MULTICHANNEL HYDROGEN ALARM MONITOR: H2CON-6
1
H2 Sensor compatibility
H2SENSE-1205 and CHS-HTR-PH-100-5V-CM
2
Range
0 to 2% Hydrogen (0 to 4 % optional)
3
No. of Channels
Up to 6 Nos.
4
Max distance
From sensors to alarm module - 20M. Can be customized for distances greater than 20M
5
Sensor Termination
PCB Screw terminations
6
Action time
1 second for common alarm outputs
7
Outputs
Relay 1: “HI” Fan Control
Relay 2: “XHi” Charging shut down & Hooter
Relay 3: “XXHi” Additional actions ( provided only on customer demand)
8
Communication
RS485 (Galvanic isolation ) with Modbus protocol (Optional against order)
9
Output Terminations
NO/NC contacts 5 Amp/250V AC non inductive load
10
Power
11V to 14.5V DC from Battery,
20V to 30V DC optional, 24V AC optional ( Customer to specify )
11
Power to Transducers
Resistive and active current limit to 100mA max
12
Housing
IP65, 150X80X55 ABS Plastic and Wall Mounting
    Specification subject to changes without prior notice, due to continuous R&D and development of Company’s Products