Home About Products Technology Clientele Testimonials Contact Us
 
 
HYDROGEN LEAK PROBE
View Product
CHS-HY-001
View Product
MULTICHANNEL HYDROGEN DISPLAY MONITOR
View Product
HYDROGEN VIGIL BATTERY SAFE
View Product
HYDROGEN LEAK PROBE CONTROLLER
View Product
MULTICHANNEL HYDROGEN ALARM MONITOR
View Product
HYDROGEN VIGIL
View Product
THE INPUT DEVICES
View Product
THE CONTROLLERS
View Product
HYDROGEN VIGIL – 2W
View Product
HYDROGEN DIGITAL CONTROL SIGNAL TRANSMITTER
View Product
LEAK SENSE - NEW LAUNCH
View Product
HYDROGEN ANALOG CONTROL SIGNAL TRANSMITTER
View Product
 
 
> HYDROGEN LEAK PROBE
 

HYDROGEN LEAK PROBE: CHS-HTR- PH-100-MS3

 

PORTABLE HANDHELD APPLICATION

 

Hydrogen Leak Probe, CHS-HTR-PH-100-MS3 is a portable handheld input device for HHLI-H2 which is a battery operated display and control unit.

  • This device contains a front end pre-amplification that can be trained for the ranges 0 to N% H2 in air (N = 1 to 10) or 0 to 2000ppm for full scale display.
  • A highly useful device for detecting and pin-pointing hydrogen leakages from within closed enclosures.
  • Vastly employed in hydrogen cooled power generators, hydrogen storage and filling stations and hydrogen transport lines.
  • Crucial from a safety, security and hydrogen hazard perspective.
  • It finds successful application in risk mitigation against explosion of VRLA batteries by early detection of hydrogen gassing from such battery cells. Promises to be a highly desirable tool.
  • Range option is user specified as per demands of one's application.

 

SPECIFICATIONS OF HYDROGEN LEAK PROBE - CHS-HTR-PH-100-MS3

1

Transducer

3 Wires in metal housing containing sensor. & Head On Pre-Amplifier in enclosed Metal Housing. Intrinsically safe.  Exia II-C

2

Specificity & Range

Specific & selective  only to Hydrogen; 0 to N % & 0 to 2000 PPM

3

Sensor Technology

Solid State Electrochemical Cell (Direct Partial Pressure Measurement of Hydrogen in gaseous Fluid based on Proprietary Indian Patent No. 252998 w.e.f 14/06/2007).

4

Dimensions

24ø x 93mm Length

5

Sensor Signal

Self Generated

6

Pre Amplification End Connection

3-wire, 2-wire supply (3.7 Volt DC), one wire output

7

Sampling

By Diffusion, Gas Aperture Φ 2mm

8

Housing Material

Brass & MS plated for non- corrosive, SS316 for corrosive environment, respectively.

9

Response Time

< 3 seconds

10

Accuracy

±10 % FSD

Specification subject to changes without prior notice, due to continuous R&D and development of Company’s Products